The best way to Patch a Spa Lid

The lid of your hot tub’s is an essential device, safeguarding your spa from particles and grime. It also helps preserve power by insulating the water when the tub isn’t in use, enabling it to remain hotter with less power out-put. Most spa handles have a foam-core surrounded with a vinyl layer. It’s possible for you to patch a tear in your hottub lid using several supplies.

Turn over the spa lid so the tear is facing the floor. Lift the cover to permit water that is gathered inside to drain the tear out. A small water will not damage the core, but the core can be caused by also much water.

Turn over the lid therefore the tear is on top. Squirt some fluid vinyl cleaner and wipe the area across the tear completely. Rinse the lid then wipe it dry with a clean rag. Allow the vinyl.

Therefore the torn region is flat, lay the lid. Cut the vinyl fix patch into a size that is 1-inch greater in relation to the tear on all sides. Peel the paper backing off so the tear is in the middle and place the patch on the tear. Start from a a large part of the patch and roll it pressing down for the greatest outcomes.

Rub your hand on the patch repeatedly to guarantee a safe fit. Wait at least 24 hrs to place back the lid on the spa.