The best way to Wire a Dryer Cord
In older homes, electrical sockets devoted to large appliances like clothes dryers are distinguished by three slots in the receptacle. In building, these happen to be replaced by 220 Volt 4-slot sockets. Both socket designs accommodate the large-present draws of appliances that mix cooling or heating Sacramento repair specialists with motor-driven features. Equipment consumers can be exposed by a cord that is worn to significant risk. Replacing four or three -prong cords needs methods that are somewhat different in order to guarantee safe operation of your clothes dryer.
Three-Wire Dryer Cord
Unplug the dryer.
Remove the cord-link panel in the rear of the dryer.
Disconnect the wires from their screws in the following order: left (red or black), proper (red or black) and middle (white). Black and red wires are present-bearing, as well as their positions are inter-changeable. The central wire that is white is neutral. You’ll visit strap or a wire which may happen to be attached to the middle terminal screw. Remove it, and connect it to the screw supplied on the device chassis.
Four-Wire Dryer Cord
Remove the dryer wire.
Connect the black and red wires to the right and left terminal screws, just like the three-wire cord. Black and red wires are present-bearing, as well as their positions are inter-changeable.
Connect the wire that is neutral to the middle terminal screw.
Connect the ground Cape Coral wire that is remaining to the screw keeping the ground Redding strap from your terminal. Both wires that are green belong to the screw. Close the entry panel.