The best way to Replace an Existing Toilet

You may need to change your bathroom bathroom whether it’s it is defective or out-of-date. In the event the bathroom foundation or bowl is cracked, water damage or discolor the flooring as well as may leak out. By changing the bathroom yourself using several simple hand-tools and and perhaps a helper, it’s possible for you to save cash. Toilets usually consist of two-pieces, using the tank at the top as well as the bowl on the bottom. A set of fasteners secure the two parts together, as well as a pair of bolts, some times described as “johnny bolts,” secure the toilet to the bathroom ground.

Locate the water shut-off valve, which protrudes in the wall behind the base of the bathroom. Turn the handle clockwise to turn off the water-supply to the bathroom. Flush the toilet several times to drain the water in the tank. The toilet-bowl to drive the remaining water through the foundation. Wipe any remaining water using a towel or rag up.

Follow the supply-line which is attached to the bottom of the toilet tank to the shut-off valve. Turn the connector counter-clockwise to loosen and remove the line in the bottom of the tank. If there’s still water in the tank place a bucket or bowl underneath the connector. Loosen the two bolts on the left and right sides of the bathroom foundation using an adjustable wrench or ratchet established. Remove the tank cover to test that all or the majority of the water is emptied from your tank.

Push the whole bathroom to the left and right to to interrupt the wax seal positioned underneath the base. If needed, enlist the aid of some other person. Grab each facet of the bathroom, with one-hand beneath the other close to the lip of the bowl as well as the bottom fringe of of the tank. Lift the bathroom upright from your bolts that protrude in the floor and go exterior.

Scrape the wax ring which is adhered to the pipe flange in the ground using a scraper a way. Center a new wax ring along with the pipe flange

Assemble tank and the toilet before setting the the applying in to location. Lift the bathroom very much the same as in Stage 4 and established it over the bolts that protrude from a floor. Place organization stress down on the most effective of the bathroom to sandwich the wax ring involving the toilet base as well as the flange.

Thread the bolts on in the bathroom foundation and tighten them having an adjustable wrench or a ratchet. Place straight back the caps on the bolts and pop every one in to location. Thread the end-of the offer hose connector on the root of the tank manually, being mindful crack or perhaps not to strip the connector by over-tightening. Rotate the water-supply valve in a counter clockwise path to to show straight back the water-supply to the toilet. Allow the tank to fill and flush several times to make sure that it’s working.

See related

Comments are closed.